[H3C-luser-admin]service-type telnet level 3 You have no pri
来源:学生作业帮 编辑:搜搜考试网作业帮 分类:综合作业 时间:2024/07/29 22:25:28
[H3C-luser-admin]service-type telnet level 3 You have no privilege to modify the level higher
这个还是没办法解决,就只有提示等级不够.我检查过很多次,命令还是输入不了.我之前用tlenet用户输命令时,用了save,这个会不会关事?
还有 我输入指令时候 提示都是指向 authentication 这个上面
这个还是没办法解决,就只有提示等级不够.我检查过很多次,命令还是输入不了.我之前用tlenet用户输命令时,用了save,这个会不会关事?
还有 我输入指令时候 提示都是指向 authentication 这个上面
![[H3C-luser-admin]service-type telnet level 3 You have no pri](/uploads/image/z/15073971-51-1.jpg?t=%5BH3C-luser-admin%5Dservice-type+telnet+level+3+You+have+no+pri)
能将整个交换机的配置贴上来么.我怀疑是con设置了权限
再问: [H3C]display version H3C Comware Platform Software Comware Software, Version 3.10, Release 2108P04 Copyright (c) 2004-2009 Hangzhou H3C Technologies Co., Ltd. All rights reserved. H3C S3100-26TP-SI uptime is 0 week, 0 day, 1 hour, 38 minutes H3C S3100-26TP-SI with 1 Processor 64M bytes SDRAM 8M bytes Flash Memory Config Register points to FLASH
再答: 你这个是看的版本。命令是dis cu
再问: user-interface aux 0 authentication-mode password user privilege level 2 set authentication password simple 123456 history-command max-size 20 idle-timeout 6 0 screen-length 30 user-interface vty 0 4
再答: user-interface aux 0 这个是con口 user privilege level 2 这个是权限等级,你使用con口登录只有2等级权限,不是最高的3.所以不能创建用户。 你使用3等级的telnet帐号登录修改一下吧
再问: 小弟愚钝,进入TELNET后不会设置,请大侠指点
再答: 你至少需要telnet用户有3级权限,之后进入后 sys user-interface aux 0 user privilege level 3 quit quit save 保存后,con口设置就有最高权限了,可以创建用户了 telnet有3级权限也是可以直接创建的
再问: [H3C]display version H3C Comware Platform Software Comware Software, Version 3.10, Release 2108P04 Copyright (c) 2004-2009 Hangzhou H3C Technologies Co., Ltd. All rights reserved. H3C S3100-26TP-SI uptime is 0 week, 0 day, 1 hour, 38 minutes H3C S3100-26TP-SI with 1 Processor 64M bytes SDRAM 8M bytes Flash Memory Config Register points to FLASH
再答: 你这个是看的版本。命令是dis cu
再问: user-interface aux 0 authentication-mode password user privilege level 2 set authentication password simple 123456 history-command max-size 20 idle-timeout 6 0 screen-length 30 user-interface vty 0 4
再答: user-interface aux 0 这个是con口 user privilege level 2 这个是权限等级,你使用con口登录只有2等级权限,不是最高的3.所以不能创建用户。 你使用3等级的telnet帐号登录修改一下吧
再问: 小弟愚钝,进入TELNET后不会设置,请大侠指点
再答: 你至少需要telnet用户有3级权限,之后进入后 sys user-interface aux 0 user privilege level 3 quit quit save 保存后,con口设置就有最高权限了,可以创建用户了 telnet有3级权限也是可以直接创建的
[H3C-luser-admin]service-type telnet level 3 You have no pri
华为交换机service-type telnet level 1和level 3有什么区别?
华为H3C的TELNET密码修改问题?
[h3c-ui-aux0]user privilege level 3 这段就不行了
The number you have dialed is no longer in service.
please ensure that you have admin privileges before proceedi
I have no more letter (),thank you.A to type B to be typed C
-Do you have any letter __ (type)?-No,thanks.I'll do it myse
I have no more letters__,thank you A. to type B. typing C. t
You have some level of English?
You have one level education paid for
13.I have no more letters ____ ,thank you. A. to type B. typ