急!请英语高手帮忙翻译（机翻不要）重谢

急!请英语高手帮忙翻译（机翻不要）重谢
Polymer Coating Review:
o Wash process:
􀂃 Two wash lines: “Non-automotive or automotive, no skirt coating” (as described
by FM reps) wash line a short three station line (elevated temperature, spray
degreaser + 2 rinse stations with manual “leaf blower’ drying.) “Automotive,
skirt coated” piston wash machine / process similar to Dongsuh, Korea rotary
wash lines (see Dongsuh wash comments.)
􀂃 Single rotary, multi-station immersion wash machine in open plant
environment for automotive skirt coating pre-wash. Manual load / unload with
manual air blow off. Wash process does not meet GM expectations for our
products. Federal Mogul representatives stated that an FM style wash process
would be installed on-site to support any GM business.
􀂃 Wash processes use RO water.
o Coating process:
􀂃 Automotive, D-10 coating and non-automotive hybrid type coating (J-coat, D-10
and epoxy, 45 micron thick.)
􀂃 Very limited, current automotive skirt coating production at this facility.
􀂃 Separate, environmentally controlled skirt coating room, but no current
production to evaluate process. Similar design / parameters to Dongsuh, Korea
process.
• Other Surface Coating:
o One spray anodizing machining on-site for coating of diesel piston domes.
o Phosphate and Sn plating capabilities on-site.
• Laboratory Facilities:
o Very basic metallurgical lab capabilities. In depth material characterization / failure
analysis would have to be handled through other FM facilities.
o Spark spectrometer for alloy chemistry analysis.
机械英语 是活塞厂考察报告 请准确翻译 谢谢

Polymer Coating Review:
聚合物涂覆的回顾：
o Wash process:
o 清洗工艺
􀂃 Two wash lines:“Non-automotive or automotive,no skirt coating” (as described
by FM reps) wash line a short three station line (elevated temperature,spray
degreaser + 2 rinse stations with manual “leaf blower’ drying.) “Automotive,
skirt coated” piston wash machine / process similar to Dongsuh,Korea rotary
wash lines (see Dongsuh wash comments.)
􀂃两条清洗生产线：“非汽车的或汽车的,无活塞侧缘涂覆（no skirt coating）（如FM的代表所描述的）
清洗生产线,一条短的三站式生产线（高温、喷淋去油污剂＋两个带手动“叶片式吹风机”干燥的漂洗站）
“汽车,活塞侧缘涂覆的”活塞清洗机/工艺与Dongsuh的韩国旋转清洗生产线类似（请见Dongsuh的清洗评论）
􀂃 Single rotary,multi-station immersion wash machine in open plant
environment for automotive skirt coating pre-wash.Manual load / unload with
manual air blow off.Wash process does not meet GM expectations for our
products.Federal Mogul representatives stated that an FM style wash process
would be installed on-site to support any GM business.
􀂃在开放式工厂环境中的,用于汽车活塞侧缘涂覆预清洗的单一旋转、多站浸入式清洗机.
采用手动气吹的手动装载/卸载.清洗工艺对我们的产品而言不满足GM（通用汽车）的期望.
美国辉门（Federal Mogul,FM）的代表说：FM类型的清洗工艺将安装在那里以支持GM来
的任何业务.
􀂃 Wash processes use RO water.
􀂃清洗工艺采用反渗透水
o Coating process:
o 涂覆工艺：
􀂃 Automotive,D-10 coating and non-automotive hybrid type coating (J-coat,D-10
and epoxy,45 micron thick.)
􀂃汽车,D-10涂覆和非汽车混合型涂覆（J－涂覆,D-10和环氧,45微米厚）
􀂃 Very limited,current automotive skirt coating production at this facility.
􀂃在这一设施目前很有限的汽车活塞侧缘涂覆生产能力.
􀂃 Separate,environmentally controlled skirt coating room,but no current
production to evaluate process.Similar design / parameters to Dongsuh,Korea
process.
􀂃分开的环境保护活塞侧缘涂覆间,但目前没有生产,与Dongsuh
韩国工艺的设计/参数类似
• Other Surface Coating:
•其他表面涂覆：
o One spray anodizing machining on-site for coating of diesel piston domes.
o 一套在现场的喷涂阳极氧化加工,用于柴油机活塞圆顶的涂覆
o Phosphate and Sn plating capabilities on-site.
o 在现场有磷酸盐和锡的电镀能力.
• Laboratory Facilities:
•实验室实施：
o Very basic metallurgical lab capabilities.In depth material characterization / failure
analysis would have to be handled through other FM facilities.
o 很基本的冶金实验室能力.在深度的材料表征和失效分析方面,还必须通过其他FM
的设施来解决
o Spark spectrometer for alloy chemistry analysis.
o 备有电火花光谱仪（spark spectrometer）用于合金的化学分析
机械英语 是活塞厂考察报告 请准确翻译